Bluetooth Firmware For K12 Windows Version (ANSI US Layout)

Attention: This OTA Bluetooth Firmware Tool Tutorial is only for K12 keyboard (Only applied to Keyboard Windows option and keyboard wireless bluetooth mode).

The keyboard bluetooth firmware can be used in all K12 keyboard versions ( Such as Hot swappable / White backlight / RGB backlight / Mechanical switch/ Optical switch) except for K12 Non-backlight version.

Note: If everything works fine with your keyboard. Please don’t update the bluetooth firmware. There is a chance it can damage your keyboard.

 

1. Download the File (Make sure to save them in the desktop)

OTA Tool

K12 Wins version keyboard bluetooth firmware (ANSI US).hex

K12 Non-Backlight Wins version keyboard bluetooth firmware (ANSI US).hex

2. Switch the toggle to the bluetooth mode and connect the K12 to your Windows Computer. (Make sure K12 has enough battery.)

3.  Unzip the OTA Tool file and click the "Setting" section.

4. Edit the PID code: ProductID for K12 ANSI (US) layout is 024F. Then save the file after you edited the PID code. 

5. Open the first file "Bluetooth HID Firmware Upgrade V2.0 Beta3" and start the wireless programming process. 

6. Click the "Browse" option and choose the "K12 Wins version keyboard bluetooth firmware (ANSI US).hex" file. (Make sure the "HEX" format file is saved on the desktop.)

7. If the file shows "No Connection!" then it means the PID code does not match the program. 

8.  Then click the "Upgrade" option and start downloading the OTA tool. Then test the keyboard.

9. If your K12 keyboard cannot work after downloading the QTA tool, then try to close the file and reconnect your K12 keyboard. 

10. Reset your K12 keyboard.

11. Delete and disconnect the keyboard from your computer.

12. Try to connect the keyboard to your computer again and it should be fine. If not, then repeat step 11.